Shawn Marchetti

We use Graco Linelazer for our airfield painting. Pressurized bead system incorporated
with the machine, and they have models that will set your skip lines and lengths automatically.

http://www.graco.com/us/en/products/product-families/linelazer.html

We only have the manual adjust on the broom.

We have the MB tow behind broom with end drive along with the cassettes, and blowers on each side. I run the broom depending on the wind direction, but usually “split” the runway in half with snow. We are getting around 100 hours as well with the broom, but we have not
had any issues with any pattern. I have seen it bounce, but I stop and fine…[Read more]

Thank you all for your input. Our portables we are using is the ICOM A6, and we are also using the A220, and the F221s. In our airside vehicles we have 2 radios so we can monitor multiple channels at the same time. These radios were bought a few years ago so I am wondering if this could be a issue with outdated hardware, as well as the install,…[Read more]